IEC 60061-3 Lamp Caps and Holders Gauges for Control of Interchangeability and Safety

Standards & Clauses:

IEC 60061-3:2015 “Lamp caps and holers together with gauges for the control of interchangeability and safety –Part 3:Gauges,MOD”

IEC 60238:2017 “Edsion screw lampholders”

IEC 61184:2017 “Bayonet lampholders”

 

Samples and Restrictions:

Screw, bi-pin, prefocus, miscellaneous, bayonet lamp caps and holders

 

Application:

To check whether the dimensions and shapes of the lamp caps and holders meet standard requirements by using the various types of lamp caps and lamp holders interchangeable size gauge.

 

Test Principle:

Measure the shape and size of the lamp cap or holder by using the corresponding gauge, to verify the lamp cap or holder is compliant with the standard range.

 

Structure:

Please refer to the figures in the standards.

 

Technical Parameters:

 

No.:	Category	Name	Standard Figure
1	E14 Lamp Cap	E14 Lam Cap “Go” Gauge	7006-27F-1
2		E14 Lamp Cap “Not Go” Gauge	7006-28B-1
3		E14 Lamp Cap Prevent Accidental Contact Gauge	7006-55-2
4		E14S1 Lamp Cap “Go” Gauge	7006-27G-1
5		E14 Lamp Cap Contacting Making Gauge	7006-54-2
6		E14 Lamp Cap Torque Test Gauge	IEC60968Fig2
7	E27 Lamp Cap	E27 Lam Cap “Go” Gauge	7006-27B-1
8		E27 Lamp Cap“Not Go” Gauge	7006-28A-1
9		E27S1 Lamp Cap “Go” Gauge	7006-27C-1
10		E27 Lamp Cap Contacting Making Gauge	7006-50-1
11		E27 Lamp Cap Prevent Accidental Contact Gauge	7006-51A-2
12		E27 Lamp Cap Prevent accidental contact gauge 51*39	7006-51-2
13		E27 Lamp Cap Torque Test Gauge	IEC60968Fig2
14	B15 Lamp Cap	B15 Lamp Cap Insertion Gauge	7006-4A-2
15		B15 Lamp Cap Retention Gauge	7006-4B-1
16		B15 Lamp Cap “Not Go” Gauge	7006-10-8
17		B15 Lamp Cap “Go” Gauge	7006-11-8
18		B15 Lamp Cap Torque Test Gauge	IEC60968Fig3
19	B22d Lamp Cap	B22 Lamp Cap Insertion Gauge	7006-4A-2
20		B22 Lamp Cap Retention Gauge	7006-4B-1
23		B22 Lamp Cap “Go” Gauge	7006-10-8
24		B22 Lamp Cap “Not Go” Gauge	7006-11-8
25		B22D Lamp Cap Acceptance Gauge	7006-3-1
26		BY22d Lamp Cap “Go” Gauge	7006-17A-1
27		B22 Lamp Cap Torque Test Gauge	IEC60968Fig3
28	GZ10 Lamp Cap	“Go” / “Not Go” Gauge	7006-120-1
29	GZ10 Lamp Holder	“Go” / “Not Go” Gauge	7006-120A-1
30	GU10 Lamp Holder	“Go” / “Not Go” Gauge	7006-121A-1
31	GU10 Lamp Cap	GU10 Lamp Cap “Go” / “Not Go” Gauge	7006-121-1
32	E26 Lamp Cap	E26 Lamp Cap “Go” Gauge	7006-27D-3
33		E26 Lamp Cap “Not Go” Gauge	7006-29L-4
34		E26d Lamp Cap Prevent Accidental Contact Gauge	7006-29A-2
35		E26 Lamp Cap Contacting Making Gauge	7006-29-3
36		E26d Lamp Cap Reference Diameter 23mm “Go” Gauge	7006-29B-2
37		E26d Lamp Cap Reference Diameter 13.2mm “Go” Gauge	7006-29C-2
38		E26d Lamp Cap Reference Diameter 10.4mm “Go” Gauge	7006-29D-1
39	E26 Lamp Cap		7006-27E-1
40	E14 Lamp Holder	“Go” Gauge	7006-25-7
41		“Not Go” Gauge	7006-26-4
42		Contacting Making Gauge	7006-30-2
43		Candle Lamp Contacting Making Gauge	7006-30A-1
43		Prevent Accidental Contact Gauge	7006-31-4
44		Torque Test Cap	IEC 60238 Figure5
45		Test Cap "A"	IEC 60238 Figure13
46		Test Cap "b"	IEC 60238 Figure13
47	E27 Lamp Holder	“Go” Gauge	7006-25A-2
48		“Not Go” Gauge	7006-26-4
49		Prevent Accidental Contact Gauge	7006-22A-4
50		Anti-bulb Neck Damage and Contacting Making Gauge	7006-21-5
51		Inside Shrapnel Resilience Gauge	7006-22D-1
52		Side Contacts Edge Gauge	7006-22B-1
53		Side Contacts Resilience Gauge	7006-22C-1
54		Torque Test Cap	IEC 60238 Figure5
55		Aging test cap	IEC 60238 Figure14
56	E40 Lamp Cap	“Go” Gauge	7006-27-7
57		“Not Go” Gauge	7006-28D-1
58		Prevent Accidental Contact Gauge	7006-53-1
59		Contacting Making Gauge	7006-52-1
60	B22 Lamp Holder	Plug Gauge	7006-12-8
61		Gauge for checking contact position and contact force in (90°-130°)	7006-15-7
62		Gauge for checking contact position and contact force(90°-130°)	7006-20-4
63		Supplementary “Go” Gauge	7006-12A-2
64		“Not Go”/ Retention Gauge	7006-12B-2
65		Gauge for checking contact position and contact force	7006-15A-2
66		Gauge for the slots in lampholders	7006-13-5
67		Plug Gauge	7006-17B-1
68	E12 Lamp Cap	“Go” Gauge	7006-27H-1
69		“Not Go” Gauge	7006-28C-1
70		Supplementary “Go” Gauge	7006-27J-1
71		Contacting Making Gauge	7006-32-1
72	E17 Lamp Cap	“Go” Gauge	7006-27K-1
73		“Not Go” Gauge	7006-28F-1
74		Contacting Making Gauge	7006-26D-1
75	E39 Lamp Cap	“Go” Gauge	7006-24B-1
76		“Not Go” Gauge	7006-24C-1
77		Contacting Making Gauge	7006-24A-1
78	E40 Lamp Holder	“Go” Gauge	7006-25-7
79		“Not Go” Gauge	7006-26-4
80		Prevent Accidental Contact Gauge	7006-24-3
81		Contacting Making Gauge	7006-23-3
82	1EP10 Lamp Cap	“Not Go” Gauge	7006-28-7
83	2EP10 Lamp Cap	“Go” Gauge	7006-37-1
84	3EY10 Lamp Cap	“Go” Gauge	7006-7-1
85	4E10 Lamp Cap	“Go” Gauge	7006-27A-2
86	G5 Lamp Cap	“Go” and “Not Go” Gauge for Unfinished Bi-pin Cap	7006-46-3
87		“Go” Gauge for Bi-pin Cap on Finished Lamps	7006-46A-3
88	G13 Lamp Cap	“Go” and “Not Go” Gauge for Unfinished Bi-pin Cap	7006-44-4
89		“Go” Gauge for Bi-pin Cap on Finished Lamps	7006-45-4
90	G5 Lamp Holder	Contacting Making Plug Gauge for Finished Lamps	7006-47A-2
91		Double Ended Gauge	7006-47B-3 III IV V
92		Double Ended “Go” Gauge	7006-47B-3 I II
93	G13 Lamp Holder	Double Ended Gauge	7006-60B-4 III IV V
94		Double Ended “Go” Gauge	7006-60C-3 I II
95	GU5.3 Lamp Holder	“Go” Gauge	7006-73A-1
96		Gauge A	7006-73A-2
97		Gauge B	7006-126B-1
98	G9 Lamp Cap	“Go” Gauge	7006-129-1
99		“Not Go” Gauge	7006-129A-1
100	G5.3 Lamp Cap	Gauge for Bi-pin Cap G5.3 on Finished Lamps	7006-73-1
101	GU5.3	“Go” and “Not Go” Gauge for Bi-pin Base	7006-109-1
102	GX5.3	“Go” and “Not Go” Gauge for Bi-pin Base	7006-73B-2
103	GY5.3	“Go” and “Not Go” Gauge for Bi-pin Base	7006-73C-2
104	2G10	“Go” Gauge for Caps on Finished Lamps	7006-118-1
105	GX10q	“Go” Gauge for Caps on Finished Lamps	7006-84-2
106		“Not Go” Gauge A for Caps on Finished Lamps	7006-84A-1
107		“Not Go” Gauge B for Caps on Finished Lamps	7006-84B-1
108		“Go” Gauges for Keys on Finished Lamps	7006-84E-1
109		“Not Go” Gauges for Caps on Finished Lamps	7006-84F-1
110	GY10q	“Go” Gauge for Caps on Finished Lamps	7006-85-2
111		“Not Go” Gauge A for Caps on Finished Lamps	7006-85A-1
112		“Go” Gauges for Keys on Finished Lamps	7006-85D-1
113		“Not Go” Gauges for Caps on Finished Lamps	7006-85E-1
114	G10q, GY10q	“Go” Gauge	7006-79-2
115	G12	“Go” Gauge for Caps on Finished Lamps	7006-80-1
116	PG12,PGX12 Lamp Cap	“Go” Gauge	7006-81-3
117	Fc2 Lamp Cap	“Go” Gauge	7006-114-1
118	GR8	“Go” Gauge for Caps on Finished Lamps	7006-68-2
119	GR8	Gauge for caps to ensure entry of maximum lampholders and to check pin-spacing and length	7006-68A-2
120	GR8,GR10q	“Go” Gauge for checking the pins of caps on finished lamps	7006-68E-1
121	GR8,GR10q	“Go” and “Not Go” Gauge for checking the pins of caps	7006-68F-1
122	2G13 Lamp Cap	“Go” Gauge	7006-33-2
123	2G72GX7 Lamp Cap	“Go” and “Not Go” Gauge	7006-102-1
124	G23 Lamp Cap	“Go” and “Not Go” Gauge	7006-69-2
125	GX23 Lamp Cap	“Go” and “Not Go” Gauge	7006-86-1
126	G24GX24 Lamp Cap	“Go” and “Not Go” Gauge	7006-78-3
127	GX32 Lamp Cap	“Go” and “Not Go” Gauge	7006-87-2
128	G4	“Go” and “Not Go” Gauge for Bi-pin Lamp Bases	7006-72-1 A B
129	GU4	“Go” and “Not Go” Gauge for Bi-pin Lamp Bases	7006-108-2
130	GZ4	“Go” and “Not Go” Gauge for Bi-pin Lamp Bases	7006-67-1
131	G6.35GX6.35GY6.35GZ6.35	“Go” and “Not Go” Gauge for Bi-pin Bases	7006-61-5
132	G6.35GX6.35GY6.35	“Go” Gauge for Bi-pin Bases	7006-61A-3
133	GZ6.35	“Go” Gauge for Bi-pin Bases	7006-59B-1
134	GU7	“Go” and “Not Go” Gauge for Bi-pin Bases	7006-113-2
135	R17d	“Go” and “Not Go” Gauge	7006-57-3
136	Fa6	“Go” and “Not Go” Gauge	7006-41-2
137	Fa8	“Go” Gauge	7006-40-1
138	Fa8	“Not Go” Gauge	7006-40A-1
139	2G11	“Go” Gauge	7006-82-1
140	B15 Lamp Holder	“Go” Gauge	7006-12D-2
141	B15d Lamp Holder	“Not Go” Gauge	7006-12C-2
142		Gauge for checking contact position and contact force in bayonet lampholders	7006-15B-1
143		Gauges for the slots in the lampholders	7006-13-5
144	E17 Lamp Holder	“Go” Gauge	7006-25H-1
145		“Not Go” Gauge	7006-26C-1
146		Gauges for testing contact-making in lampholers	7006-26E-1
147	E26	“Go” Gauge	7006-25B-2
148	E26&E26d	“Not Go” Gauge	7006-26A-2
149	E26d	Plug gauge for testing protection against accidental contact in E26d lampholder	7006-29J-1
150	G6.35 Lamp Holder	Min. Retention Gauge	7006-61C-4
151		“Go” Gauge	7006-61B-4
152	G12 Lamp Holder	“Go” Gauge A	7006-80A-2
153		“Go” Gauge B	7006-80B-2
154		“Go” Gauge C	7006-80C-2
155		“Go” Gauge D	7006-80D-3
156		“Go” Gauge E	7006-80E-3
157	R7S	Gauges for testing contact-making	7006-62-4
158	G5.3 Lamp Holder	“Go” Gauge	7006-73A-1
159	GX53 Lamp Holder	“Go” Gauge A	7006-142A-1
160		“Go” Gauge B	7006-142B-1
161		“Go” Gauge C	7006-142C-1
162		“Go” and “Not Go” Gauge	7006-142G-1
163		“Not Go” Gauge	7006-142H-1
164	R7S Lamp Holder	“Go” Gauge	7006-62-1
165	GX5 Lamp Holder	“Not Go” Gauge	7006-142J-1
166	E5 Lamp Holder	“Go” Gauge	7006-25F-1
167		“Not Go” Gauge	7006-25G-1
168	E10 Lamp Holder	“Go” Gauge	7006-25-7
169	EP10 Lamp Holder	“Go” Gauge	7006-37A-1
170	E10 Lamp Holder	“Not Go” Gauge	7006-26-4
171	EY10 Lamp Holder	“Not Go” Gauge	7006-26-4
172	EP10 Lamp Holder	“Not Go” Gauge	7006-26-4
173	EY10 Lamp Holder	“Go” Gauge	7006-7A-1
174	E11 Lamp Holder	Gauges A for testing contact-making	7006-6A-1
175		Gauges B for testing contact-making	7006-6B-1
176	E12 Lamp Holder	“Go” Gauge	7006-25C-1
177		“Not Go” Gauge	7006-26B-1
178		Contact-making	7006-32A-1
179	E17 Lamp Holder	“Go” Gauge	7006-25H-1
180		“Not Go” Gauge	7006-26C-1
181		Gauges for testing contact-making	7006-26E-1
182	E26 Lamp Holder	“Go” Gauge	7006-25B-2
183		“Not Go” Gauge	7006-26A-2
184	E26d Lamp Holder	“Not Go” Gauge	7006-26A-2
185	E26 Lamp Holder	Gauges for testing contact-making	7006-25J-1
186	E26d Lamp Holder	“Go” Gauge	7006-29K-1
187		Gauges for testing contact-making	7006-29G-3
188		Gauge for checking the radial position of the intermediate contact of lampholder	7006-29E-1
189		Gauge for testing the relative positions of the contacts in lampholder	7006-29F-1
190		Gauge for testing contact-making in metal-shell paper-lined lampholders	7006-29H-3
191		Plug gauge for testing protection against accidental contact	7006-29J-1
192		Gauge for testing unacceptable contact-making in lampholders	7006-29M-1
193	E39 Lamp Holder	“Go” Gauge	7006-24E-1
194		“Not Go” Gauge	7006-26-4
195		Gauges for testing contact-making	7006-24D-1
196		Gauge for testing maximum insertion torque in lampholders with shell-grip features	7006-24F-1
197		Gauge for testing minimum insertion torque in lampholders with shell-grip features	7006-24G-1
198	E40 Lamp Holder	“Go” Gauge	7006-25-7
199		“Not Go” Gauge	7006-26-4
200		Gauges for testing contact-making	7006-23-3
201		Plug gauge for lampholders for testing protection against accidental contact	7006-24-3
202		Torque Test Cap	IEC 60238 Figure5
203	GX53 Lamp Cap	“Go” and “Not Go” Gauge	7006-142-1
204		“Not Go” Gauge	7006-142D-1
205		“Go” and “Not Go” Gauge for checking keyways in caps	7006-142E-1
206		“Not Go” Gauge for checking keyways in caps	7006-142F-1