EN/IEC 60061-3 All Lamp Cap Gauge

Article	Description	European standards	Other standards	REMARK
G01.01	“GO”GAUGE FOR E14 CAPS ON FINISHED LAMPS	EN60061-3	IEC60061-3	7006-27F-1
G01.02	“NOT GO” GAUGE FOR E14 CAPS ON FINISHED LAMPS	EN60061-3	IEC60061-3	7006-28B-1
G01.03	GAUGE FOR FINISHED LAMPS FITTED WITH E14 CAPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT	EN60061-3	IEC60061-3	7006-55-2
G01.04	GAUGE FOR FINISHED LAMPS FITTED WITH E14 CAPS FOR TESTING CONTACT-MAKING	EN60061-3	IEC60061-3	7006-54-2
G01.05	“GO”GAUGE FOR DIMENSION”S1” OF E14 CAPS ON FINISHED LAMPS	EN60061-3	IEC60061-3	7006-27G-1
G01.06	“GO”GAUGES FOR SCREW THREADS OF LAMPHOLDERS E10,E14&E40	EN60061-3	IEC60061-3	7006-25-7
G01.07	“NOT GO”GAUGE FOR SCREW THREADS OF LAMPHOLDERS E10,EP10,EY10,E14,E27,E39&E40	EN60061-3	IEC60061-3	7006-26-4
G01.08	PLUG GAUGE FOR E14 LAMPHOLDER FOR TESTING CONTACT-MARKING	EN60061-3	IEC60061-3	7006-30-2
G01.09	PLUG GAUGE FOR LAMPHOLDERS E14 WITH CANDLE SHAPED SHAFT FOR CANDLE LAMPS FOR TESTING CONACT-MARKING	EN60061-3	IEC60061-3	7006-30A-1
G01.10	GAUGE FOR TESTING CONTACT-MARKING AND PROTECTION AGAINST ACCIDENTAL CONTACT DURING INSERTION OF LAMPS IN LAMPHOLDERS E14	EN60061-3	IEC60061-3	7006-31-4
G01.11	“GO” GAUGE FOR E27 CAPS ON FINISHED LAMPS	EN60061-3	IEC60061-3	7006-27B-1
G01.12	"NOT GO" GAUGE FOR E27 CAPS ON FINISHED LAMPS	EN60061-3	IEC60061-3	7006-28A-1
G01.13	GAUGE FOR FINISHED LAMPS FITTED WITH E27 CAPS FOR TESTING CONTACT-MAKING	EN60061-3	IEC60061-3	7006-50-1
G01.14	GAUGE FOR CAPS ON FINISHED LAMPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT DURING INSERTION E27	EN60061-3	IEC60061-3	7006-51A-2
G01.15	GAUGE FOR CAPS ON FINISHED LAMPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT E27/51X39	EN60061-3	IEC60061-3	7006-51-2
G01.16	"GO" GAUGE FOR DIMENSION "S1" OF E27 CAPS ON FINISHED LAMPS	EN60061-3	IEC60061-3	7006-27C-1
G01.17	"GO" GAUGE FOR LAMPHOLDERS E27	EN60061-3	IEC60061-3	7006-25A-2
G01.18	"NOT GO" GAUGES FOR SCREW THREADS OF LAMPHOLDERS E10, EP10, EY10, E14, E27, E39 & E40	EN60061-3	IEC60061-3	7006-26-4
G01.19	GAUGE FOR TESTING PROTECTION AGAINST BULB-NECK DAMAGE AND FOR TESTING CONTACT-MAKING IN LAMPHOLDERS E27	EN60061-3	IEC60061-3	7006-21-5
G01.20	GAUGE FOR TESTING CONTACT-MAKING AND PROTECTION AGAINST ACCIDENTAL CONTACT DURING INSERTION OF LAMPS IN LAMPHOLDERS E27	EN60061-3	IEC60061-3	7006-22A-4
G01.21	GAUGE FOR DETECTING SIDE-CONTACTS WITH CUTTING-EDGES IN LAMPHOLDERS E27	EN60061-3	IEC60061-3	7006-22B-1
G01.22	GAUGE I FOR CHECKING SIDE-CONTACT RESILIENCY IN LAMPHOLDERS E27	EN60061-3	IEC60061-3	7006-22C-1
G01.23	GAUGE II FOR CHECKING SIDE-CONTACT RESILIENCY IN LAMPHOLDERS E27	EN60061-3	IEC60061-3	7006-22D-1
G01.24	"GO" GAUGE FOR CAPS E26, E26/50X39, E26/51X39 & E26D	EN60061-3	IEC60061-3	7006-27D-2
G01.25	GAUGE FOR CAPS ON FINISHED LAMPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT E26D	EN60061-3	IEC60061-3	7006-29A-2
G01.26	GAUGE FOR TESTING CONTACT-MAKING OF LAMPS FITTED WITH CAPS E26, E26/50X39, E26/51X39 & E26D (NON-SKIRTED)	EN60061-3	IEC60061-3	7006-29-3
G01.27	GAUGE WITH REFERENCE DIAMETER OF 23 MM FOR CAPS E26D	EN60061-3	IEC60061-3	7006-29B-2
G01.28	GAUGE WITH REFERENCE DIAMETER OF 13,2 MM FOR CAPS E26D	EN60061-3	IEC60061-3	7006-29C-2
G01.29	GAUGE WITH REFERENCE DIAMETER OF 10,4 MM FOR E26D CAPS ON FINISHED LAMPS	EN60061-3	IEC60061-3	7006-29D-1
G01.30	"NOT GO"GAUGE FOR CAPS E26, E26/50X39, E26/51X39& E26D	EN60061-3	IEC60061-3	7006-29L-4
G01.31	GO" PLUG GAUGE FOR LAMPHOLDERS E26D	EN60061-3	IEC60061-3	7006-29K-1
G01.32	NOT GO" GAUGE FOR LAMPHOLDERS E26 & E26D.........	EN60061-3	IEC60061-3	7006-26A-2
G01.33	"GO" GAUGE FOR LAMPHOLDERS E26	EN60061-3	IEC60061-3	7006-25B-2
G01.34	GAUGE FOR TESTING CONTACT-MAKING IN LAMPHOLDERS E26D	EN60061-3	IEC60061-3	7006-29G-3
G01.35	GAUGE FOR TESTING CONTACT-MAKING IN METAL-SHELL PAPER-LINED LAMPHOLDERS E26D	EN60061-3	IEC60061-3	7006-29H-3
G01.36	GAUGE FOR TESTING UNACCEPTABLE CONTACT-MAKING IN LAMPHOLDERS E26D	EN60061-3	IEC60061-3	7006-29M-1
G01.37	GAUGES FOR TESTING THE RELATIVE POSITIONS OF THE CONTACTS IN LAMPHOLDERS E26D	EN60061-3	IEC60061-3	7006-29F-2
G01.38	PLUG GAUGE FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT IN E26D LAMPHOLDER	EN60061-3	IEC60061-3	7006-29J-1
G01.39	GAUGE FOR TESTING CONTACT-MAKING IN LAMPHOLDERS E26	EN60061-3	IEC60061-3	7006-25J-1
G01.40	GAUGE FOR CHECKING THE RADIAL POSITION OF THE INTERMEDIATE CONTACT OF LAMPHOLDER E26D	EN60061-3	IEC60061-3	7006-29E-1
G01.41	"GO" GAUGE FOR CAPS ON FINISHED LAMPS E40	EN60061-3	IEC60061-3	7006-27-7
G01.42	"NOT GO" GAUGE FOR CAPS ON FINISHED LAMPS E40	EN60061-3	IEC60061-3	7006-28D-1
G01.43	GAUGE FOR FINISHED LAMPS FITTED WITH E40 CAPS FOR TESTING CONTACT-MAKING	EN60061-3	IEC60061-3	7006-52-1
G01.44	GAUGE FOR FINISHED LAMPS FITTED WITH E40 CAPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT	EN60061-3	IEC60061-3	7006-53-1
G01.45	"GO" GAUGES FOR SCREW THREADS OF LAMPHOLDERS E10, E14 & E40	EN60061-3	IEC60061-3	7006-25-7
G01.46	"NOT GO" GAUGES FOR SCREW THREADS OF LAMPHOLDERS E10, EP10, EY10, E14, E27, E39 & E40	EN60061-3	IEC60061-3	7006-26-4
G01.47	PLUG GAUGE FOR LAMPHOLDERS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT E40	EN60061-3	IEC60061-3	7006-24-3
G01.48	GAUGE FOR TESTING PROTECTION AGAINST BULB-NECK DAMAGE AND FOR TESTING CONTACT-MAKING IN LAMPHOLDERS E40	EN60061-3	IEC60061-3	7006-23-3
G01.49	"GO" GAUGE FOR CAPS ON FINISHED LAMPS E39	EN60061-3	IEC60061-3	7006-24B-1
G01.50	"NOT GO" GAUGE FOR CAPS ON FINISHED LAMPS E39	EN60061-3	IEC60061-3	7006-24C-1
G01.51	GAUGE FOR FINISHED LAMPS FITTED WITH E39 CAPS FOR TESTING CONTACT-MAKING	EN60061-3	IEC60061-3	7006-24A-1
G01.52	"GO" GAUGE FOR SCREW THREAD OF LAMPHOLDERS E39	EN60061-3	IEC60061-3	7006-24E-1
G01.53	"NOT GO" GAUGES FOR SCREW THREADS OF LAMPHOLDERS E10, EP10, EY10, E14, E27, E39 & E40	EN60061-3	IEC60061-3	7006-26-4
G01.54	GAUGE FOR TESTING PROTECTION AGAINST BULB-NECK DAMAGE AND FOR TESTING CONTACT-MAKING IN LAMPHOLDERS E39	EN60061-3	IEC60061-3	7006-24D-1
G01.55	GAUGE FOR TESTING MAXIMUM INSERTION TORQUE IN LAMPHOLDERS WITH SHELL-GRIP FEATURES E39.	EN60061-3	IEC60061-3	7006-24F-1
G01.56	GAUGE FOR TESTING MINIMUM TORQUE IN LAMPHOLDERS WITH SHELL-GRIP FEATURES E39	EN60061-3	IEC60061-3	7006-24G-1
G01.57	"GO" AND "NOT GO" GAUGE FOR BI-PIN CAP ON FINISHED LAMPS G23	EN60061-3	IEC60061-3	7006-69-2
G01.58	"GO" AND "NOT GO" GAUGE FOR BI-PIN CAP ON FINISHED LAMPS GX23	EN60061-3	IEC60061-3	7006-86-1
G01.59	"GO" AND "NOT GO" GAUGE FOR CAPS ON FINISHED LAMPS 2G7 & 2GX7	EN60061-3	IEC60061-3	7006-102-1
G01.60	"GO" GAUGE FOR CAPS ON FINISHED LAMPS 2G11	EN60061-3	IEC60061-3	7006-82-1
G01.61	"NOT GO" GAUGES "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS G24, GX24 & GY24.	EN60061-3	IEC60061-3	7006-78F-5
G01.62	"GO" GAUGE FOR CHECKING THE PINS OF CAPS ON FINISHED LAMPS GR8 & GR10Q	EN60061-3	IEC60061-3	7006-68E-1
G01.63	"GO" AND "NOT GO" GAUGE FOR CHECKING THE PINS OF CAPS (NOT FOR USE ON FINISHED LAMPS)GR8 & GR10Q	EN60061-3	IEC60061-3	7006-68F-1
G01.64	GAUGE FOR CAPS TO ENSURE ENTRY OF MAXIMUM LAMPHOLDERS AND TO CHECK PIN-SPACING AND LENGTH GR8	EN60061-3	IEC60061-3	7006-68A-2
G01.65	?GO? GAUGES FOR CAPS 2G13	EN60061-3	IEC60061-3	7006-33-2
G01.66	"GO" GAUGE FOR CAPS G10Q, GX10Q, GY10Q & GZ10Q	EN60061-3	IEC60061-3	7006-79-2
G01.67	GAUGE FOR CAPS TO ENSURE ENTRY OF MAXIMUM LAMPHOLDERS AND TO CHECK PIN-SPACING AND LENGTH GR10Q	EN60061-3	IEC60061-3	7006-77A-2
G01.68	"GO" GAUGE FOR CAPS ON FINISHED LAMPS GX10Q	EN60061-3	IEC60061-3	7006-84-2
G01.69	"NOT GO" GAUGE "A" FOR CAPS ON FINISHED LAMPS GX10Q	EN60061-3	IEC60061-3	7006-84A-1
G01.70	"NOT GO" GAUGE "B" FOR CAPS ON FINISHED LAMPS GX 10Q	EN60061-3	IEC60061-3	7006-84B-1
G01.71	"GO" GAUGE FOR CAPS ON FINISHED LAMPSGY10Q	EN60061-3	IEC60061-3	7006-85-2
G01.72	"NOT GO" GAUGE "A" FOR CAPS ON FINISHED LAMPS GY10Q	EN60061-3	IEC60061-3	7006-85A-1
G01.73	"GO" GAUGES FOR THE KEYS OF CAPS ON FINISHED LAMPS GY10Q	EN60061-3	IEC60061-3	7006-85D-1
G01.74	"NOT GO" GAUGES FOR CAPS ON FINISHED LAMPS GY10Q	EN60061-3	IEC60061-3	7006-85E-1
G01.75	"GO" AND "NOT GO" GAUGES FOR BI-PIN LAMP BASES G4	EN60061-3	IEC60061-3	7006-72-1
G01.76	"GO"AND "NOT GO" GAUGE FOR UNMOUNTED BI-PIN CAP (NOT FOR USE ON FINISHED LAMPS) G5	EN60061-3	IEC60061-3	7006-46-3
G01.77	"GO" GAUGE FOR BI-PIN CAP ON FINISHED LAMPS G5	EN60061-3	IEC60061-3	7006-46A-3
G01.78	"GO" AND "NOT GO" GAUGE FOR UNMOUNTED BI-PIN CAP (NOT FOR USE ON FINISHED LAMPS) G13	EN60061-3	IEC60061-3	7006-44-4
G01.79	"GO" GAUGE FOR BI-PIN CAP ON FINISHED LAMPS G13	EN60061-3	IEC60061-3	7006-45-4
G01.80	DOUBLE-ENDED GAUGES FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACTMAKING G5	EN60061-3	IEC60061-3	7006-47B-3
G01.81	DOUBLE-ENDED "GO" GAUGES FOR A COMBINED PAIR OF LAMPHOLDERS G5	EN60061-3	IEC60061-3	7006-47C-3
G01.82	DOUBLE-ENDED GAUGES FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING G13	EN60061-3	IEC60061-3	7006-60B-4
G01.83	DOUBLE-ENDED "GO" GAUGES FOR A COMBINED PAIR OF LAMPHOLDERS G13	EN60061-3	IEC60061-3	7006-60C-3
G01.84	"GO" GAUGES FOR BASES G6.35, GX6.35 & GY6.35	EN60061-3	IEC60061-3	7006-61A-3
G01.85	GAUGE "A" FOR LAMPHOLDERS S14D	EN60061-3	IEC60061-3	7006-112D-1
G01.86	GAUGES "B1" AND "B2" FOR LAMPHOLDERS S14D	EN60061-3	IEC60061-3	7006-112E-1
G01.87	GAUGE "A" FOR LAMPHOLDERS S14S.	EN60061-3	IEC60061-3	7006-112A-1
G01.88	GAUGE "B" FOR LAMPHOLDERS S14S	EN60061-3	IEC60061-3	7006-112B-1
G01.89	GAUGE "C" FOR LAMPHOLDERS S14S	EN60061-3	IEC60061-3	7006-112C-1
G01.90	"GO" GAUGE FOR BASE G9	EN60061-3	IEC60061-3	7006-129-1
G01.91	"GO" AND "NOT GO" GAUGE FOR BASES GU10	EN60061-3	IEC60061-3	7006-121-1
G01.92	SINGLE-PIN GAUGE "E" FOR CHECKING MINIMUM RETENTION FORCE OF CONTACTS IN LAMPHOLDERS 2G(X)7, 2G10, 2G11, G(X)23, G(X)(Y)24, G(X)(Y)32	EN60061-3	IEC60061-3	7006-69E-3
G01.93	"NOT GO" GAUGES "F" FOR CHECKING NON-INTERCHANGEABILITYOF CAPS IN LAMPHOLDERS G24, GX24 & GY24	EN60061-3	IEC60061-3	7006-78F-5
G01.94	"GO" GAUGE FOR R17D LAMPHOLDERS	EN60061-3	IEC60061-3	7006-57A-1
G01.95	CONTACT-MAKING GAUGE FOR LAMPHOLDER R17D	EN60061-3	IEC60061-3	7006-57B-1
G01.96	GAUGES FOR TESTING INSERTION AND CONTACT-MAKING IN LAMPHOLDERS 2G13	EN60061-3	IEC60061-3	7006-33A-2
G01.97	GAUGES FOR TESTING THE INSERTION OF CAPS IN LAMPHOLDERS B15D, B22D & BY22D	EN60061-3	IEC60061-3	7006-4A-2
G01.98	GAUGES FOR TESTING THE RETENTION OF B15D AND B22D CAPS IN THE HOLDER	EN60061-3	IEC60061-3	7006-4B-1
G01.99	"NOT GO" GAUGES FOR CAPS ON FINISHED LAMPS BA9, B15, B22 & BY22D	EN60061-3	IEC60061-3	7006/10/8
G01.100	"GO" GAUGES FOR CAPS ON FINISHED LAMPS BA9, B15, BA15 & B22.	EN60061-3	IEC60061-3	7006/11/8
G01.101	ACCEPTANCE GAUGE FOR B22D CAPS INTENDED FOR AUTOMATIC WIRE THREADING	EN60061-3	IEC60061-3	7006/3/1
G01.102	"NOT GO"/RETENTION GAUGE FOR LAMPHOLDERS B15	EN60061-3	IEC60061-3	7006-12D-2
G01.103	SUPPLEMENTARY "GO" GAUGE FOR LAMPHOLDERS B15D	EN60061-3	IEC60061-3	7006-12C-2
G01.104	GAUGES FOR SLOTS IN LAMPHOLDERS B15D, B22D, B22D-3 & BY22D	EN60061-3	IEC60061-3	7006-13-5
G01.105	GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS B15D	EN60061-3	IEC60061-3	7006-15B-1
G01.106	GAUGES FOR TESTING THE INSERTION OF CAPS IN LAMPHOLDERS B15D, B22D & BY22D	EN60061-3	IEC60061-3	7006-4A-2
G01.107	GAUGES FOR TESTING THE RETENTION OF B15D AND B22D CAPS IN THE HOLDER	EN60061-3	IEC60061-3	7006-4B-1
G01.108	GAUGES FOR TESTING THE RETENTION OF B15D AND B22D CAPS IN THE HOLDER	EN60061-3	IEC60061-3	7006/10/8
G01.109	"GO" GAUGES FOR CAPS ON FINISHED LAMPS BA9, B15, BA15 & B22	EN60061-3	IEC60061-3	7006/11/8
G01.110	PLUG GAUGES FOR LAMPHOLDERS BA21, B15 & B22	EN60061-3	IEC60061-3	7006/12/8
G01.111	GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS B22D-3 (90°/135°)	EN60061-3	IEC60061-3	7006-15-7
G01.112	PLUG GAUGE FOR BAYONET LAMPHOLDER B22D-3 (90°/135°)	EN60061-3	IEC60061-3	7006-20-4
G01.113	SUPPLEMENTARY "GO" GAUGES FOR LAMPHOLDERS B22D & BY22D .	EN60061-3	IEC60061-3	7006-12A-2
G01.114	"NOT GO"/RETENTION GAUGE FOR LAMPHOLDERS B22	EN60061-3	IEC60061-3	7006-12B-2
G01.115	GAUGES FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS B22D & BY22D	EN60061-3	IEC60061-3	7006-15A-2
G01.116	GAUGES FOR SLOTS IN LAMPHOLDERS B15D, B22D, B22D-3 & BY22D	EN60061-3	IEC60061-3	7006-13-5
G01.117	PLUG GAUGE FOR LAMPHOLDERS BY22D	EN60061-3	IEC60061-3	7006-17B-1

G01.01
“GO”GAUGE FOR E14 CAPS ON FINISHED LAMPS
EN60061-3
IEC60061-3
7006-27F-1

G01.02
“NOT GO” GAUGE FOR E14 CAPS ON FINISHED LAMPS
EN60061-3
IEC60061-3
7006-28B-1

G01.03
GAUGE FOR FINISHED LAMPS FITTED WITH E14 CAPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT
EN60061-3
IEC60061-3
7006-55-2

G01.04
GAUGE FOR FINISHED LAMPS FITTED WITH E14 CAPS FOR TESTING CONTACT-MAKING
EN60061-3
IEC60061-3
7006-54-2

G01.05
“GO”GAUGE FOR DIMENSION”S1” OF E14 CAPS ON FINISHED LAMPS
EN60061-3
IEC60061-3
7006-27G-1

G01.06
“GO”GAUGES FOR SCREW THREADS OF LAMPHOLDERS E10,E14&E40
EN60061-3
IEC60061-3
7006-25-7

G01.07
“NOT GO”GAUGE FOR SCREW THREADS OF LAMPHOLDERS E10,EP10,EY10,E14,E27,E39&E40
EN60061-3
IEC60061-3
7006-26-4

G01.08
PLUG GAUGE FOR E14 LAMPHOLDER FOR TESTING CONTACT-MARKING
EN60061-3
IEC60061-